We got 50 plus of the once Popular Buckeye Model 66,
and several other Models of the Buckeyes,
but just don't have it all listed yet.
Please look under Buckeye Parts
There are a few things there already.
Check back later for Incubators.
Buckeye Fan Board Hinge
(OEM Part)
.JPG)
.JPG)
.JPG)
Here is a part that is hard to find
that is not as bad as the ones
you already got. Fully Operational
When you need this,
nothing else will work.
Buckeye Fan Boards
I dont have any pictures of a
Buckeye Fan Board I can put on line
at this time. But we do have them
complete and we also got all the
parts that could be needed for repairs
on one, including hard to find Hinges
and the Spring Type Heating elements.
The 66 Incubators use a 1200 Watt
Heating element, Spring Type
or Calrod Type. I got both. Also some
of the OEM Torrington Aluminum Fan
Blades. Also the 8 Blade Multi-Wing
Blade that will almost double the
air flow inside the machine.
Some had a 1/3 HP Motor and some
had a 1/2 HP Motor. All were 220 volts.
A lot of these Redwood Machines are
still running. I know, because I sell
parts to them. One that is working
properly like it was designed to do,
will still hatch as good as any other
given the same flock eggs. I know
many of you wont believe it,
but it is true. Buckeye stopped building
the 66s in about 1956-1958 and went to
the Buckeye 140. Also a good machine.
There are several of them still running also.
Yes, I know, because they buy parts from me.
I have operated both of them and I think
the 66s would out hatch the 140s. The last
we ran here on this place were the 140s
with the 141 hatcher. The 140s weakest
link was its Boston Turner Transmission.
I still got enough parts to rebuild a few
more of those, but not to many more.
I'm 72 years old now in 2019. My Daddy
started hatching eggs when I was 5 years
old. I still remember the first hatch.
Many people from the community came
to see it. A wonderful time back then.
OK, guess enough reminessing,
back to work!
How in the world did we go from
Fan Boards to Ancient history?
If youre still reading, Thanks for reading
and may Jesus Bless you Forever!!
Buckeye Parts
Multi-Wing 8 Blade Fan
These 8 Blade Fans Increase the Air Flow
dramaticly more than the origionally equiped
4 Blade Aluminum Torrington Blades
Especially helpful in the Hatchers....5/8 Inch Hole
The 8 Blades move a LOT More Air than the 4 Blade ones.



Buckeye Incubators Parts
We have many of the Buckeye Incubaotr Parts for the
Buckeye Model 66, Model 501, Buckeye Clipper, Model 140,
Model 141, Model 540, and even some of the
newer digital machines.
Sporlan Solenoid Valves


We have these Original Equipment (OEM)
Sporlan Valves
in 120 volt and 240 Volt coils.
Excellent Condition
**********************************************
Spray Nozzle Holders (NEW)
These are the Spray Nozzle Holders that
fit the Buckeyes 501/ 52 / 66 / 140 / 360 / 540
and many of the later model Buckeyes.
Probably fit earlier models than mentioned.
Available in 1/4 inch and 3/8 inch in sizes.
***********************************************************
Buckeye Fan Board Hinge
(OEM Part)
.JPG)
.JPG)
.JPG)
Here is a part that is hard to find
that is not as bad as the ones
you already got. Fully Operational
When you need this,
nothing else will work.
Buckeye 140
Pilot Lights Assembly
Push To Test
(May Also Fit Other Models)


You may get the get the entire
assembly or you may just get the bulbs.
****************************
Important Notice
I am putting this right up front on the Buckeye Page.
If you have Older Model Buckeyes such as the Mercu-Matic,
Model 510, Model 24, Model 66, 140,360, 540, Nova,
and even some of he even Earlier or Later Models of the Buckeyes,
we have a quite Large inventory of the Parts for these
older machines still available that are no longer available
from from dealers.Some Parts would span over 2 or 3 models.
There are many of these machines sitting in Hatcherys
that people think they CANNOT get PARTS for that we
very well may have on the shelf.
You possibly can put these machines back on line with just a few parts.
Now I am not saying I got EVERY spare part there is,
but you may be amased at the amount we do have available.
Try us for you need for Spare Parts for the Older Buckeyes.
****************************************************************************
Buckeye Model 66 Recorder Charts



*************************************************************************************************************
Buckeye Nova Digital Control Cards
MK II Control Card 30-051 ISSB
Plug In Control Card







These are getting Pretty Rare
***************************************************************************************************************************
BuckeyeTray Pins
These Tray Pins are NEW and they are Plated to Prevent Rust
We also have the Plated Yellow No Rust E Clips
The Eclips are in Stacks of 500. (Not Pictured)
You need 2 tray Pins and 2 Eclips per tray.




******************************************************************************************************************
Buckeye Incubator Tray Frames
They are 35 1/2 inches long and 12 1/4 inches wide
They Accomidate the Original Metal Trays and the Plastic Egg Trays of 132 Eggs.
They will also acomidate the Blue Green 42 Egg Plastic Chick Master
Tray and the Pink CM 48 Egg Plastic Tray.
Also the Plastic Turkey Egg Tray. All these trays are the same size for the Buckeyes.





*********************************************************************************************************************
For these older Model Buckeyes, we have a very large
inventory of parts for them. To many to list here.
If you have these Buckeye Models 24,501, 66, 140, 141, 360, 540, Nova,
and other later Model Buckeyes, we should be able to help you
with pats for these machines that are no longer
available anywhere else. We will feature more parts for these
machines later.
Oh Yes, we have about 20 of Model 66 machines
still available and complete.
If I can help, contact us.
*******************************************************************************************
Plenty of the Metal Trays for the Hatcher and the Incubators,
Farm Racks, Even the Roll In Incubator Turning Racks.
Fans and Fam Motors, and complete Fan Boards,
Turner Motors and Turner Transmissions,
Recorder Clocks, Charts, Solenoid Valves,
Charts Ink, Turner Parts, Relays, On and On.
There is just to many things to mention.
We got many Buckeye parts.
If you still have some of these machines
and need parts to egt them going again,
Call us. WE can probably help.